When it comes to application of paint on ferrous and non-ferrous surfaces, industrial paints are designed to provide a better and effective option. Whether you are using these paints and coatings on iron, steel, or aluminum, they need to be modified in a way that they provide a better finish on that particular material. As a painter, you need to be knowledgeable in the method needed for the painting procedure to improve your chances of an effective finish.
Painting steel is one of the simplest things you will do in industrial painting. However, for you to get a smooth finish, you need to eliminate the rust, grease, and debris that could cause unevenness on the surface. Use a hand power tool, solvent degreasing, or sandblasting to bring down the material to be painted to bare metal. No matter the tool that you intend to use, make sure that it works perfectly to get rid of all the impurities from the metal leaving it clean, smooth, and ready for a fresh coat of paint.
Aluminum is one of the most difficult materials that you can ever paint using industrial paints and coatings. You will have to use the appropriate scrubber or acid wash to remove the existing paint or impurities. For you to get a smooth finish, you need to apply paint carefully on the surface and allow it to reach the fissures that were developed during the painting process. The paint should be spread evenly throughout the surface in order to give your aluminum surface a smoother finish.
Coatings – Getting Started & Next Steps
While plastic and acrylics can be easily painted using an industrial coating, they usually respond differently to certain products. The reason behind this is that the solvents normally used in these products normally vary. You should, therefore, embark on using water-reducible coatings in order to stop damages from occurring. Some bright paints normally have pigments with a poor hiding nature hence tend to show their semi-transparent properties of the acrylics. If you are painting such a material, make sure to use a thick primer.
Services Tips for The Average Joe
When painting a certain product or material using industrial paints, you need to begin with a test spot that will help you in many ways. This spot needs to be prepared just like the entire material that is due to be painted. Using this spot, you will get to know which paints work best and those that do not. In addition, you will know if the paint is compatible with the product you intend to get at the end.